Polypropylene Fiber–Synthetic Fiber for Concrete Reinforcement Supplier

InfraPFiber, fiber mesh for concrete micro-reinforcement, is made from 100% homo-polymer polypropylene fibers (fibrillated bundles). With our high technology InfraPFiber has been manufactured to an optimum gradation for use as concrete secondary reinforcement.* Principle of UsageWhen InfraPFiber bundles are added to the concrete mix at the rate of 0.9kg/m3, they are openand separate into millions of indivisual fibers through proper mixing action.These fibers are uniformly distributed throughout the concrete in all directions, providing effectivesecondary reinforcement for control of disruptive intrinsic forces.While the concrete hardens and shrinks, microscopic cracks usually occur.However they are blocked and prevented from developing into macro-cracks and potential problems when intersecting fiber strands. And also the fibers serve to minimize the width and length ot those cracks that may appear in the hardened state. * Charateristics and Advantages- Reduction of plastic cracking- Cost effectiveness- Excellent impact, abrasion, shatter and fatigue resistance- Excellent chemical resistance ( rust and alkali proof )- Excellent durability and toughness- Providing residual strength- Reinforcing against water migration* ApplicationParking place Road Runway ShortcreteSidewalks * How to use1. Application Rate : Typical application rates are at 0.1% by volume without change of water/cement ratio.2. Mix Design : InfraPfiber micro reinforcing is purely mechanical anchoring process not affecting the chemical hydration of the cement. And it is compatible with all concrete admixtures at normal mix proportions.3. Mix Procedure : InfraPfibers are added directly to in situ mixer, batch plant and ready mixed concrete truck at an appropriate application rate. Mixing time and speed are in accordance with ASTM D C-94.4. Workability : While the slump value of concrete can be reduced due to slow settlement of concrete ingredients, the workability is not affected with standard application rates of fiber reinforcement and no additional water is needed. 5. Finishability : InfraPfiber reinforced concrete can be finished by any normal finishing technique.