Brief Introduction:
NeoDen IN6, a desktop reflow oven, using new technology of dynamic warming-up control system to ensure stable temperature. With a no tubular heater, the whole heating chamber is uniformly heated, and built with all-aluminium alloy material.
IN6 has built-in soldering smoke filtering system, which do not need traditional smoke tube any more.
IN6 solders PCB in full convection way which could make sure the components heated evenly and it supports most normal components, LED and kinds of IC.
Features:
1.Full convection, excellent soldering performance.
2.6 zones design, light and compact.
3.Smart control with high sensitivity temperature sensor, the temperature can be stabilized within + 0.2℃.
4.Original high-performance aluminum alloy heating plate instead of heating pipe, both energy-saving and high-efficient, and transverse temperature difference is less than 2℃.
5.Original built-in soldering smoke filtering system, elegant appearance and eco-friendly.
6.Heat insulation protection design, the casing temperature can be controlled within 40℃.
7.Household power supply, convenient and practical.
8.ESD tray, easy to collect PCB after reflowing, convenient for R&D and prototype.
9.Several working files can be stored, freely switch between Celsius and Fahrenheit, flexible and easy to understand.
10.Japan NSK hot-air motor bearings and Swiss heating wire, durable and stable.
11.Reinforced heavy-duty carton package, light-weight and environment-friendly.
12.PCB soldering temperature curve can be displayed based on real-time measurement
13.Approved by TUV CE, authoritative and reliable.
Details:
Parameters:
Power requirements: 110/220VAC 1-phase
Rated power max.: 2000 Watts
Heating zone quantity: upper3/down3
Heating type: nichrome wire and aluminum alloy heating
Cooling zone quantity: 1
Conveyor speed: 15 - 60 cm/min (6 – 23 inch/min)
Standard Max Height (mm):30mm
Operation direction: left→right
Temperature control range: Room temperature～300℃
Temperature control accuracy: ±0.2℃
PCB temperature distribution deviation: ±1℃
Soldering width: 260 mm (10 inch)
Length process chamber: 680 mm (26.8 inch)
Bottom cooling fans at offload section
Heat-up time: approx. 15 min.
Dimensions: 1020 x 507 x 350 mm (L x W x H)
Packing Size:112*62*56cm
Net weight: 49 kg
Gross Weight:64KG
Payment and Shipping:
1) Payment method: PayPal or other online payment
2) The default delivery method is via DHL (door to door), unless specific requirement from customer.
3) Delivery time: 7-10 working days.
4) Delivery Details : 1-2 working days after 100% payment.
Clients Reviews