Gypsum Powder Production Line

Gypsum PowderProduction Line adopts German advanced technology, Design capacity ofannual output of 30,000-300,000 tons, desulfurization gypsum, phospho gypsum,natural gypsum production line can produce. Gypsum powder production lineaccording to

customer needs,choose different technology, with advanced technology research and developmentdesign team, focus on technology upgrading. And obtained The Chinese patent, inthe leading position in the industry. Our production line adopts advanceddisassembly type, most of them is assembled in our factory. Greatly shorten theinstallation time.

Processof Gypsum powder production line

The crusher breaksthe large-sized gypsum ore into small particles smaller than 25mm, which arestored and transported into the mill for grinding, and the raw gypsum powderthat has been ground to the required fineness. Then the product is sent to thefluidized bed furnace through the powder classifier. Calcined, and the rest isreturned to the mill for regrinding until qualified. Calcined qualified gypsumpowder is sent to the clinker bin for storage or sent to the product workshopfor use.

Patent certificate for utility model

The main working principle of the fluidized furnace dryingsystem: the main body of the fluidized furnace is mainly composed of dense hotair pipes, which pass through the high-temperature hot air pipes, exchange heatwith materials, and release heat to Gypsum materials. A Roots fan is installedat the bottom of the fluidized furnace, and the cold air is blown into thefurnace body through the air distribution plate, and the powder in the furnacebody is blown to a boiling state. Flowing to the discharge port, the quality ofthe Gypsum powder produced in this way is stable, and the crystal water contentand initial and final setting time are relatively easy to control.