Car Care Product Carb and Choke Carburator Cleaner Spray

Carburetor & Choke Cleaner can effectively remove greasy dirt, gum, and carbon deposits on PVC valve, ERG valve, choke, and other parts, It can easily flush off the residue on carburetor. The product can increase combustion efficiency to save oil and decrease gas pollution.

Product Features:

1.Fast acting formula

2.Cuts through carbon build up

3.Cuts through varnish & gum

DIRECTIONS:Keep away from battery terminals and electrical connections. Spray with can in an upright position. Insert plastic tube firmly into valve button.With the engine off and cool:Carburetor: Remove the air cleaner and clean the outside of the carburetor and all of the linkage. Avoid spraying electrical connections. Manifold heat control: Spray on exposed ends of cool heat riser shaft. Allow penetrating and clean. Move counterweight up and down until free.With the engine running:Carburetor: Spray to both ends of the choke valve shaft while working choke by hand. Spray down and around the carburetor's throat to remove deposits from the throttle plate area. Do not spray down carburetor throat with engine off. Do not spray below the throttle plate. Choke: If choke sticks, remove choke cover and spray. PCV Valve: Disconnect the crankcase side of the valve and spray into the open end of the valve while working the plunger back and forth.Not recommended for fuel-injected vehicles. Will not harm catalytic converters or oxygen sensors. Contains no methanol or methylene chloride. If sprayed on a painted surface, wipe off at once.