Sensors & Transmitters
Dongguan Susheng Machinery Com.,Ltd
30 Dec 2025
(
)
Get Your Quote Now : Place of origin : China
Optimal Saw Parameter Page1/3
| Model | SY-6 | Machining Length | 4000mm |
| Machining width | | Servo motors for pushing material | 750W（Tuke) |
| Machining thick | 10-80MM | Servo motors for sawing | 1.3KW |
| Machining Cross section area | 250*30MM | Sawblade Motor | 10HP |
| Scan Speed | 80m/min | Sawblade Dia | H450*D30 |
| Length Scan | Infrared light sensor（SICK） | Suctionlet Dia | 100mm*1 |
| Defect Scan | Fluorescent sensor（SICK） | Installed ttl Power | 11HP |
| Guide Rails | Roust | System | Windows 7 |
| Worktop height | 900MM | Scribe Space | adjustable |
| N.W： | about1230KG | Machine size（mm）： | 6700*1300*1600 |
1、Working method: When the pusher is backed up, the drawing line onthe surface of the sheet is scanned and the length of thesheet is sent to the control computer for optimisation
2、Working method: When the pusher is backed up, the drawing line onthe surface of the sheet is scanned, and the length of thesheet is fed into the control computer for optimization
3、Specified specification priority (priority sawing of workpiecelengths specified in the bill of materials, priority access tomaterials in short supply on the production line)
4、Fixed cutting (sawing in order of material list, this mode can beused for material without defects)
5、Value first (prices can be set for different parts in the cut listand the preference is optimised at the time according to themaximum value obtained) Page2/3
6、Defective sawing (only sawing according to the position of the drawnline, no optimization)
7、Support Excel table to import bill of material, branch form format customization
8、Cut list can add barcode, print barcode, two-dimensional code freelyset
Clients Reviews