Sensors & Transmitters
Wuxi Enviclone Test Equipment Co., Ltd.
30 Dec 2025
(
)
Get Your Quote Now : Place of origin : China
enviClone Photovoltaic PV Module Solar Panel Wind Resistance Dynamic Mechanical Load Test Machine
Overview
| Note: specifications can be customized as per other test standards or requirement.The PV modules Dynamic Mechanical Load (DML) Test Machine simulates the dynamic load with the pneumatic cylinders and suction cups. Each pneumatic cylinder drives one suction cup, and each cylinder rod is equipped with one tension pressure sensor. Each pneumatic cylinder is a separate control module. Periodic load stress test is performed on the Photovoltaic (PV) Modules’ surface, and PV Modules can be installed according to different requirements. The system also has the ability to monitor the curvature of the PV Module’s center points in real time. |
| The Dynamic Mechanical Loading Testing Equipment is used to test wind resistance or impact capacity performance of solar energy pv modules as per international test standard IEC TS 62782 |
Specification
| Model No. | EVCL-DML-2200, EVCL-DML-2600 |
| Max Dimensions of Tested PV Module Panel | 2200 mm x 1200 mm, 2600mm x 1300mm, etc. |
| (Dimensions can be customized) |
| Quantity for each test | 1 Piece of PV Module |
| Pressure Method | Pneumatic Cylinders |
| Quantity of Pneumatic Cylinders | 50 pcs, 98pcs, etc (varies as per your Max dimensions of solar panel) |
| Quantity of Pressure Sensors | Each pcs for each pneumatic cylinder |
| The Max Pressure can be tested | 12,000 Pa |
| The Max Pulling Force can be tested | 7,500 Pa |
| Accuracy Deviation | ≤3% |
| Deformation Sensor | 1 (or customized as per requirement) |
| Controlling Method | Siemens PLC + HM1 |
| Drive Method | Air Compressed |
| Load Amplitude Test Range (Static) | Pressure: +500~12,000 Pa (Continuous, adjustable) |
| Suction: -500 ~ -7,200 Pa (Continuous, adjustable) Note: The test time and pressures can be adjusted during the test every time. |
| Load Amplitude Test Range (Dynamic) | Pressure: -2,500 Pa ~ +2,500 Pa |
| Suction: -500 Pa ~ -7,200 Pa |
| Frequency: 3~7 times / min |
| Accuracy Deviation: ≤ ±50 Pa. |
Test Standards
- IEC TS 62782 Photovoltaic (PV) modules – Cyclic (dynamic) mechanical load testing
- IEC 61215 Ed.3 Static: Forward Direction 2400 Pa·1IEC 61730 MST 34
- Equivalent: IEC TS 60904-12, IEC TS 61836, ISO/IEC 17025, etc.
Wuxi Enviclone Test Equipment Co., Ltd specializes in environmental simulation and test chambers including temperature humidity chambers, ozone aging chambers, UV aging chambers, salt spray chambers, rain fall waterproof chambers, blowing dust sand proof test machines, dynamic mechanical load testing equipment, walk in climatic chambers, solar raddiation testing chambers, altitude test chambers, and so on for various industries such as automotives, photovoltaic (PV) modules, solar power panels, new energy batteries, rubber manufacturing, electronics, military, etc.
Clients Reviews