GM TECH-2 Pro Kit

 ·Technical Characters

GM Tech-2 PRO Kit (CANdi & TIS)Description: The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2007Features:Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles. Support for on-board diagnostics on all GM systems 1992 thru current year. Removable hardware modules provide insurance against scan tool obsolescence. Large, easy-to-read backlit screen. RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash. Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review. Ability to view the status of vehicle diagnostic tests as they run.Bi-directionalThe authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.Vetronix Tech 2 SpecificationsDimensions: 12″×6″×2″ Microprocessor: 32 bit, 16 MHz Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion. Communications: Integral RS232 communication port. Screen: 3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once

Download Tech2 Brochure (5.2 Mb) GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):Tech-2 Flash Tester 32 MB PCMCIA Card with GM OE Applications CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb ) GM aftermarket Expertec TIS software on CD-ROM disks Hardware lock to open SPS programming in TIS 2000 RS232 cable and user's manual. Data/Sensor/Trouble Code Manual DLC Cable, DLC Loopback Adapter 12V Cigarette Lighter Power Cable SAE 16/19 Adapter NAO 12/19 Adapter Battery Power Cable Storage Case Tech-2 Users Manual download ( 3.9 Mb ) Tech-2 Flash Registration CardAn industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.The following GM vehicles utilize the CAN interface:’05 Buick Allure (3.6L) ’05 Buick LaCrosse (3.6L) ’05 Buick Rainier (5.3L) ’04-’05 Buick Rendezvous (3.6L) ’04-’05 Cadillac CTS (3.6L) ’04-’05 Cadillac SRX (3.6L / 4.6L) ’04-’05 Cadillac XLR (4.6L) ’05 Cadillac STS (3.6L / 4.6L) ’05 Chevrolet Cobalt (2.2L) ’05 Chevrolet Corvette (6.0L) ’05 Chevrolet Equinox (3.4L) ’05 Chevrolet TrailBlazer (5.3L) ’05 Chevrolet SSR (6.0L) ’04 Chevrolet Malibu (Body/Chassis only) ’05 Chevrolet Malibu (3.5L) ’05 GMC Envoy (5.3L) ’05 Pontiac G6 (3.5L) ’05 Pontiac GTO (6.0L) ’05 Pontiac Pursuit (2.2L)