TEVOUP Hydra FDM 3D Printer High Precision Printing DIY Modular 2-IN-1 3D Printer & Laser Engraver K

TEVOUP HYDRA 305x305x400mm Build Volume Lattice Glass Platform Fast Heating Bed 2 in 1 Carving Machine 3D Printer Laser Engraver Advantages:Excellent quality with CE/FCC CertificationEasy Operation & AssemblySimple Maintenance1 year WarrantyFeatures:2 in 1 laser engraving cutting and printing function, special module design structure, can easily switch laser head and print head.Using lattice glass hot bed, printing adhesion is more stable, easy to take mold; AC high power fast heating hot bed, can reach 100 degrees Celsius in 1 minute, and the temperature is constant.305x305x400mm larger build volume, able to print, cut and cave. And equip with direct extruder, free to print with soft filaments such as TPU, PLA, ABS, etc.Adopts TMC2209 silent driver, the printing noise is as low as 50dBA, so there is no need to worry about affecting sleep even if you print at night. The motherboard uses MKS Robin Nano V3.0 which bring better performance.Support auto-leveling function, more accurate measurement of the inclination of the hot bed plane, to achieve better printing results for beginners. And resume printing and filament run-out detection function. Faster speed, the max print speed is 150 mm/s. Specification:Model: Hydra 2-in-1 3D PrinterProduct Size: 56 x 60 x 62cm/22.05 x 23.62 x 24.41inProduct Weight: 16kg/35.27lbBuild volume: 305 x 305 x 400 mm/11.8 x 11.8x 15.75 inLayer resolution: 0.05mm -0.35mmBuild speed: 30mm/s - 150mm/sTravel speed: 250mm/sPrint surface: Removable Glass-ceramic (magnetic PEI flex plate as upgrade)Heat bed type: AC heat bedNumber of extruders: 1Filament diameter: 1.75mmSupported materials: PLA, PLA FLEX, PLA WOOD, ABS, PETG, HIPS, ASA, PA, PC,  TPUSpecial features: Modular X-Carriage, ABL, touchscreen, synced dual-z, direct drive, silent driversAdvanced sensors: 3dtouch, filament detection sensor, sensorless homingCalibration: Auto bed levelingPrint technology: FFF (Fused Filament Fabrication)Feeder type: DIRECT DRIVE DUAL DRIVE extruder + V6 HOTENDMax Z axis resolution: 0.05mmNozzle type: V6 + MK8Nozzle diameter: 0.4mm (spare nozzle: 0.4, 0.6, 0.8)Nozzle temperature: 130°C - 240°C (More to come...)Nozzle heat up time: <2 minutesBuild plate heat up time: 120℃ in less than 2 minutesOperating sound: < 50dBAPower: 110-240V Control board: 32bit MKS Robin nano v3.0 /Germany Made TMC 2209 v2.0 UART MODE Marlin 2.0.9.1 / 3.5Inch touchsceenUpgradability: In-house made X-carriage modular system: LASER head, open-source software, removable drivers,and more to comePackage Size: 653 x 520 x 280mm/25.7 x 20.4 x 11inPackage Weight: 17kg/37.47lb