Active Harmonic Filter (AHF), Active Power Filter (APF), Automatic Power Factor Correction

Active Harmonic Filter AHF-100AFeatures Of AHF-100AModular DesignThree Level TopologySystem Impedance Self AdaptionResonance MonitoringCentral HMI Control TechnologyPower Factor Correction (Both inductive and capacitive)Technical SpecificationsGeneral DataElectric ConfigurationUser Interface & Remote MonitoringEfficiencyInstallation ConfigurationEnvironmentalWeight, DimensionsCertificationsSystem voltage 380V Grid type 3 Phase with/ without netural 3P4W / 3P3W Power range 75A 100ANormal frequency 50Hz, （± 5Hz） Harmonic compensation Individual compensation 0-49th Responds time 80us Full responds time 10ms Filter performance >95% Switching frequency 10KHz-20KHz, Generally 15KHz Color Black System topology Three-level topology Function Harmonic elimination,Power factor correction, Three phase balancingHMI 4.3 inch, 7 inch Communication protocol RS 485, CANEfficiency >97% when work in Full loadNoise <70db CT ratio 200/5-1500/5 Cooling Forced air cooling Air flow requirement >300CFM Mounting Wall mount, Rack mount Parallel configuration Unlimited Extension Modules with parallel Protection level IP20 Cable entering Bottom, BackAmbient temperature -10℃~50℃, Without derating Temperature derating Derating when above 40℃ Maximum temperature 50℃ Humidity 5%-95% (Without condensation) Altitude Below 1000 m Altitude derating Above 1000mWeight 42Kg Dimensions W*H*D(mm) 455*200*550Certifications CE