AM02R-6 Firing System

AM-R series firing system: use 4 pcs NO.5 battery to supply power, hasAM02R(2 channels),several models, each group can fire 3-4 piecesignitors in series.

Using steps as following:

1.put the battery inside of the machine, turnon the power switch ,the light of each channel will be bright, it means thebattery is normal.

2.press the button of the remote, the indicatelight extinguish, it means this channel is normal and can be controlled by thisremote

3. turn off the power and connecting theignitor with the firing system, then turn on the power, the cue light will bemore bright ,it means connecting is normal.

4. make sure the button of the remote not bepressed(if the remote has on/off switch, you can turn off it at first),far awaythe fireworks at least 50 M, use the remote to fire.

5. setting the control number by remote (donot connect the products):

with the little stick to press the buttonof the electrical board, when the light(yellow) of the electrical boardflashing, relax the stick first then press A of the remote, the indicate lightboth of Channel A and study button, then press from A to D, the receiver from Ato D extinguish ,setting control number succeed.