iCarsoft LR V2.0 Multi-system Auto Diagnostic Tool ,
iCarsoft LR V2.0 is aProfessional and powerful vehicle fault diagnosis tool developed by iCarsoftTechnology Inc. With a 4.0” TFT LCD and unique diagnostic software, it featuresfull ECU diagnosis of single vehicle brand and test modes mainly include:CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accuratelydiagnose complex problems.
Product Features:
1. iCarsoft LR V2.0 can do itall-reads and clears trouble codes on most of the systems such as engine,transmission, ABS and airbag etc.
2. Support OBDII/EOBD Ten Modes ofOperation
3. Read Live Data
4. Full ECU Diagnosis
5. Applies to the single Brand of mostof the Models which equipped with OBDII-16 DLC
6. Easy To Use With Silicone Keys
7. DTC Library to lookup when useris operating this tool.
8. Full High Speed Upgrade via PC,Free service for life time .
9. 15 Multiple languages: English,German, Dutch, Spanish, French, Polish Italian Russian Portuguese HungarianCzech Swedish Norwegian Finnish Danish (more under development )
10. OilLight/Service Reset: Support service lamp reset.
11. ElectronicParking Brake (EPB) system:maintenance deactivates and reactivates the EPB system for replacement andinitialization.
12. DieselParticulate Filter (DPF) regenerationcontrol system, requests the DPF regeneration process while DPF blockage andturn off the DPF indicator.
13. ElectronicThrottle Control system (ETC)relearns thethrottle valve control value while clear or replace the throttle valve.
14. SAS:Steering Angle Sensor (SAS) calibration,calibrates the steering wheel to straight ahead, or recalibrates SAS whilesteering part replacement.
15. The PrintData function allows you printing out diagnostic datarecorded by the scan tool or customized test reports.
16. Battery test allows you getting the voltage of battery with OBD port by the scantool when the engine starts.
17. Battery Management System (BMS), registers new battery to the BMS while battery replacement.
18. ABSBleeding :release the air to restore ABS Brakesensitivity, or relearn while ABS replaced.
19. InjectorCoding :relearn the injector control parameterwhile the injector renewed or replaced
Professional OBDII Functions
1. Read Codes2. Erase Codes3. I/M Readiness -- I/M Readiness indicate whether or not the variousemissions-related systems on the vehicle are operating properly and are readyfor Inspection and Maintenance testing.4. Data stream.5. Freeze Frame -- When an emission-related fault occurs, certain vehicleconditions are recorded by the on-board computer. This information is referredto as freeze frame data. Freeze Data is a snapshot of the operating conditionsat the time of an emission-related fault.6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor testresults for most recently performed tests from the vehicle's on-board computer.7. On-Board Monitoring -- This function can be utilized to read the results ofon-board diagnostic monitoring tests for specific components/systems.
8. Evap SystemTest -- The EVAP test function lets you initiate a leak test for the vehicle'sEVAP system. Before using the system test function, refer to the vehicle'sservice repair manual to determine the procedures necessary to stop the test.9. Vehicle Information -- The option displays the vehicle identification number(VIN), the calibration verification number (CVN), and other information of thetest vehicle.10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, andU1) codes and pending codes
11 Turn off CheckEngine Light (MIL), clear codes and reset monitors12. Read live PCM DataStream 13. Support CAN (Controller Area Network) and all other14. Multilingual menu and DTC definitions- English, Spanish, and German, etc15. Read pending DTCs16. Read permanent DTCs17. DTCs search
18. Supports mostof the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW andJ1850 PWM.19. Works on most of 2001 and later OBDII compliant PETROL European vehicles20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles21. Works on most of 1996 and later OBDII compliant US and Asian vehicles22. View & Graph Live Data in Color Graphing and blazing fast refresh ratefor better graphing and live data readings.23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More…..
SPECIFICATIONS
Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V(Typical)
Power Consumption: 1.8W(Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)
CONTENTS:
LR V2.0 Main Unit
Main Cable
Nylon Bag
Data Cable
User Manual
ATTENTION :
Please kindly note : Not all systems/functions are available on all Years /Models .
Especially some old cars . This scan toolcovers over 20 years of models.
Certain functions may be limited from thevehicle manufacturer due to the requirement of a special factory access code.
Please kindly confirm with us about thecompatibility first with VIN,YEAR & car problems .
Welcome for more information you need anytime (complete function list/catalog/price,etc.)Thank you .
Clients Reviews