Battery Storage & UPS
Jinan Liangong Testing Technology Co.,Ltd
24 Dec 2025
(
)
Get Your Quote Now : US$ 4000 ~ 8000/ Set
Uses and characteristics:
The production of JB-500S Impact Testing Machine is strictly according to GB GB/T3808-1995 "pendulum-type impact test machine" by our company, the impact testing is according to GB GB/T229-2007 "metal Charpy test method gap out". The maximum impact energy is 500J, with a 250J bob. The Specimen cross-section is 10 × 10mm. It mainly used for ferrous metal of toughness, particularly the testing of iron, steel and its alloys. The use of the difference of potential energy between prior impact and the remaining potential energy ,showing the degree on the scale, getting the sample to absorb reactive power; It is semi-automatic testing machine on the operation, easy to operate, efficient for working, after cutting off the specimen, the remaining energy of the automatic swinging will be ready to do the next impact testing, so in laboratory of doing continual testing and other metallurgy, machinery manufacturing departments of doing substantial impact test ,this machine can manifest better advantages. Main technical specifications 1. Impact Energy: 500J 250J2. Pendulum torque
Pendulum impact energy | 500J | 250J |
Pendulum torque | 267.9492N.m | 133.9746N.m |
3. Angel of the Pendulum rises in advance: 150 °
4. Distance from the centre of hammer to impact point 800mm 5. Impact speed: 5.4m / s 6. Span of sample branch seat: 40mm 7. Radius of arc circle of sample branch seat: 1 ~ 1.5mm 8. Specimen bearing support angle: 0 ° 9. Radius of impact knife: 2 ~ 2.5mm 10. The inter angle of the impact knife: 30 ° ± 1 ° 11. The thickness of the impact knife: 16mm 12. Sample specifications: 10 × 10 × 55mm 13. Testing Machine weight: About 500kg 14. Testing Machine exterior dimensions: 2300 × 600 × 1400mm 15. Power: three-phase four-wire system 50Hz 380V 250W (Main Motor)
16. Working conditions: 1. Room temperature range is 10-35 ℃; 2. Relative humidity is less than 85％; 3. Non-corrosive media surrounding environment; 4. Installed in the thickness of more than 150mm of concrete foundations or fixed in the basis of more than 1400Kg; 5. The level degree of machine seat is installed to 0.2/1000.
Clients Reviews