Sell BT-60 Series Bed Head Units

The combination structure has been applied to our bed head units, which are divided into three types available for the customers. All of these three types consist of four combinations. The different combination may form the different typeThe aluminum takes shape by using the great tonnage hydraulic equipment; and the thickness is 2mm The unit has four parts to install the gas pipeline, the strong electricity pipeline and the weak electricity pipeline separately, in line with HTM standard. The static electricity powder is applied to the surface, and varieties of colors are available upon the request. The unit boasts enough room for electrical equipment and the gas plug, including different lamps, power source plug, the telephone or the network plug, the electrical switch, the medical gas plug, the nurse calling system and so on. The chimney uses the advanced transparent plastic, and the customers can determine its length. The electrical equipment may carry on the assembly upon the request, including British system, French system, Australian system and metric system switch and plug . The electrical equipment may carry on the assembly upon the request, including British system, French system, Australian system and metric system switch and plug . The unit may be installed by each independent standardized module combination, appealing in appearance, and can be further improved. The electrical equipment can be installed in two ways: fix the electrical board above or underneath the unit. They are kept at the same level. The board is easy to disassemble and repair. The bed head unit can be fixed on the wall, and also can be hung on the wall. Reasonable internal structure design, elegant in appearance, and the length can be adjusted upon customers' request