0.6/1 (1.2) Kv Low Voltage Unarmoured Power Cable Copper/Aluminum Unarmored Cable

0.6/1 (1.2) Kv Low Voltage 5*50mm2 5*70mm2 5*95mm2 5*120mm2  Cu (AL) /PVC/PVC Copper/Aluminum Unarmored Power CableCONDUCTOR MATERIALS :Copper  or  Aluminium   ,round or sector shaped, stranded wire (Class2)   conform to BS EN / IEC 60228  ;For smaller sizes,  solid wire(  Class 1 ) to BS EN / IEC 60228 INSULATION MATERIALS :PVC(Polyvinyl Chloride) ,PVC Insulation material and thickness shall be as per IEC 60502-1 and BS 6346Insulation Core Color Indentification:*1Core: Brown  or Blue*2Core :Brown-Blue*3Core :Brown-Blue-Grey*4Core :Brown-Blue-Grey-Black*5Core :Brown-Blue-Grey-Black-Yellow&GreenBEDDING:Extruded bedding compound PVC(Polyvinyl Chloride)ARMOURED:Aluminum(single core)/Galvanized Steel Wires applied helically over the bedding as per IECSHEATH:Extruded PVC  (Polyvinyl Chloride) to conform conform to IEC 60502-1Color-black  other colours to special orderTECHNICAL CHARACTRISITICS:* Rated voltage U0/U : 0.6/1kV.*Temperature Rang -25oC to + 70oC*Bending radius: Circular conductor =6D & Shaped Conductor=8D*Mechanical impact :Very good*Fire Performance:the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and  IEC 60332-3-24,*Flexibilty:Rigid*Low smoke emissions :BS7622*Halogen free:BS EN50267-2-1 &BS EN50267-2-3APPLICATION:SWA Armoured Cables  are  used  for power networks supply ,undergrand,outdoor and indoor applications and for use in cable ducting. Suitable for use in power distribution lines with rated voltage 0.6/1KV  low voltage installation system . For laying in shaft, water underground and large diference of level, able to bear external mechanical pressure and moderate pulling force.