Non Invasive Sonar Liquid Level Transmiter / Level Gauge / Level Indicator / Level Meter

 two wire system Non-invasive liquid  Level Gauge / level transmitter / level monitor / level meter / level sensorPrincipleWhether your tank management application is best served by Radar, Servo, or Ultrasonic, SKE offers advanced level measurement solutions:- Non-invasive Sensing TechniqueThis Non-invasive Level Gauge adopts the principle of Sonar Ranging.When the probe sensor is bonded to the bottom wall of the tank, a sound wave travels through the tank/medium and reflects back from the liquid surface.The sensor is responsible for emitting and receiving sound waves, then transmits them to the system, and calculates the height (H) of the liquid, from the time (t) taken for the signal to be received.BENEFITSNo electrical power parts inside the tank, 100% safeMax Measuring Range 30meters (100ft)No downtime/empty tank during installationNo tank break-in; Non-drilling; No leakage riskNo moving part, No maintenanceOperated by a remote control, No PC, No OscilloscopeLocal display + Remote output (4-20mA/RS-485)Best for flammable, toxic, vaporized liquid.ATEX, CE, SIL, ISO 9001Probe SensorSKE self-developed probe sensor applies piezoelectric ceramic materials.The magnetic ring is setting around the sensor. Pretty easy to install on a ferromagnetic material tank (exp: carbon steel).For a non-ferromagnetic material tank(exp: stainless), the steel adapter board with the package would help to fix it.According to different working conditions, measuring range, tank type/size, there are three types of probe sensors with different sizes and powers to be selectedMeasurement (MEA) & Calibration(CAL, TEMP)Generally, a tank monitoring case often requires two probe sensors at a time:- The one on the bottom for level measurement, called Measurement Sensor (MEA)- The other is the Diameter Calibration Sensor(CAL), which bonded on the sidewall, to continuously calibrate the real-time sound velocity and update to the Transmitter.In some practical applications, the sound velocity would be varied due to environment/liquid temperature change. The accurate sound velocity value would be a key point for the level measurement result:When the level inside is lower than the CAL sensor position, Diameter Calibration would be off work.At that time, Temperature Calibration(TEMP) would be automatically turned on. It keeps recording the temperature change, transmits data to the software algorithm, then obtains accurate measurement results.Two Wire Non-invasive Level GaugeThe Non-invasive Level Gauge is in use everywhere where the level of liquids in tanks has to be measured continuously and contactlessly. Application possibilities for radar gauges can be found in almost all areas of industry. Sewage treatment plants and water purification plants in particular, but also other environmental engineering facilities as well as power generating stations now rely on cost-effective radar sensors for continuous level measurement.Technical specifications