Tano Cable H07RN-F Rubber Cable

APPLICATION of Rubber Cable H07RN-FRubber Cable H07RN-F are designed to provide high flexibility and have the capacity to withstand weather, oils/ greases, mechanical and thermal stresses. Applications include handling equipment, mobile power supplies, worksites, stage and audio visual equipment, port areas and dams. Also suitable for fixed installations on plaster, temporary buildings and residential barracks and for use in drainage and water treatment, cold environments and severe industrial environments. Max operating voltage in single or three phase system is Uo/U 476/825 volts. In a direct current system max operating voltage is Uo/U 619/1238 volts. If in a fixed or protected installation Uo/U is 600/1000 volts. These cables are resistant to flame, acids, and oil penetration.STANDARD of Rubber Cable H07RN-FHD22.4 S3, VDE-0282 Part-4, IEC 60245-4, CE low voltage directive 73/23/EEC & 93/68/EEC., ROHS compliant.CONSTRUCTION of Rubber Cable H07RN-FFine bare copper strandsStrands to VDE-0295 Class-5, IEC 60228 Class-5Rubber core insulation EI4 to VDE-0282 Part-1Color code VDE-0293-308 and HD 186Green-yellow grounding, 3 conductors and abovePolychloroprene rubber (neoprene) jacket EM2TECHNICAL CHARACTERISTICS of Rubber Cable H07RN-FWorking voltage: 450/750 voltsTest voltage: 2500 voltsFlexing bending radius: 6 x ?Fixed bending radius: 4.0 x ?Flexing Temperature: -25o C to +60o CFixed Temperature: -40o C to +60o CShort circuit temperature: +200 o CFlame retardant: IEC 60332.1Insulation resistance: 20 MΩ x kmget more information: http://www.tanocable.com/    http://www.tanocable.net  http://power-cable.netskype:tanocableTel.:+86-371-60306197  +86-18937105488