Trustor DIsc Brake

Feature

The spring set, thrustor released disc brake(TB-TD TYPE) is applied for the heavy duty operation and coasting of industrial facilities for the service and emergency stop. (For hoist and travel drives for container cranes and transfer cranes, for large belt conveyor system, bucket wheel excavators, stackers, reclaimers, etc.)

• Gap Adjusting DeviceWith a simple gap adjusting device, automatic gap to adjust is impossible. We have, therefore, realized automatic gap adjustment device, equalizing the gap between left and light.
• Sintered PadThe sintered pad is provided for high speed and temperature. It is comparatively not abrased, stable braking and long life (two times than resin mold lining guaranteed).
• Thrustor for High Frequency and Against Oil Leakage is AdoptedFor the evaluation of brake reliability, high quality thrustor manufactured by ourselves, is applied thereto and can beoperated for 600 times per hour.
• No-Lubrication for Rotating Frictional Area To the rotating area of brake, dry metal bushings are applied, and therefore lubrication is not necessary.
• Manual Releasing Device The device is slim and the guide roller is attached to the connecting points of releasing device, so that the releasing issoftly and easily made. Noise is not produced because the upper and down parts are well fixed.
• Brake SensorThe brakes are prepared with sensors of on-off and lining abrasion thereon, and therefore, in-between maintenance canbe evaded.

Specification

• Installation Method : Horizontal base plate
• Enclosure : Dust proof, Water proof (IP 65)
• Input : AC 440V/380/220V, 3Φ, 50/60 Hz
• Allowable Power Source Fluctuation : Voltage -15% ~ +10%
• Frequency: ±5%~10%
• Max. Duty Frequency : 600 Times/HR
• Insulation Class : Class F
• Ambient Temperature : -15 ~ + 40℃
• Paint Color : MUNSELL NO. 7.5BG 6/1.5