A hand rock drilling machine, also known as a handheld rock drill or portable rock drill, is a tool to create holes in rock surfaces for various purposes. It has a wide applications such as mining, quarrying, and construction. These machines are always lightweight and portable, allowing operators to work in confined spaces and remote locations.
https://www.youtube.com/watch?v=1IKgFGvIImE
How To Use Hand Rock Drilling Machine Correctly
Preparation before operation
1. Make sure the rock drill and its accessories (such as drill bit, air pipe, cable, etc.) are intact. Then choose the appropriate drill bit according to your needs.
2. Wear protective gear such as a hard hat, goggles, ear plugs or earmuffs, gloves and a dust mask.
3. Connect the compressed air pipe and make sure it is firmly connected and there are no leaks.
4. Set the drilling position, determine the drilling position and angle, and mark the drilling point.
During Operation
1. Operate the rock drill. First, hold the handle of the rock drill with both hands and keep a steady posture. Then start the equipment according to the type of rock drill. Also, apply pressure evenly to gradually drive the drill bit into the rock. Do not use excessive force to avoid damaging the equipment or the drill bit. Finally, it is important to control the drilling speed to avoid overheating or jamming.
2. During the drilling process, if the equipment is equipped with a cooling or lubrication system, it should be used regularly to extend the life of the drill bit. Stop drilling regularly to clean the rock cuttings in the hole to ensure smooth drilling.
After operation
Turn off the rock drill and disconnect the gas or power supply. Then use appropriate tools to disassemble the drill bit and check the wear of the drill bit. Finally, clean the rock drill and its accessories and store them properly.
How to Maintain Hand Rock Drilling Machine Correctly
Daily maintenance
Daily maintenance includes cleaning the equipment, cleaning the dust and debris on the surface of the rock drill. And remove the dust and impurities inside the rock drill after each use. Check all bolts, nuts and the connection parts of the drill bit and drill rod to ensure that they are not loose. Then, regularly fill the moving parts of the equipment with suitable lubricants, especially the cylinders and valves of pneumatic rock drills.
Regular maintenance
First, regularly check the wear of the drill bit, drill rod and other consumable parts. If they are aged or damaged, replace them in time. Then clean or replace the air filter regularly to ensure that the compressed air is clean and free of impurities. Finally, check whether the air pipe is leaking or damaged, and replace it if necessary.
By combining above measures, can extend the service life of the handheld rock drill can be effectively and improve the work efficiency. What’s more, it can reduce the cost of repairing and replacing equipment. Need any help?Contact us: https://www.bestonedrill.com/contact-us/
Clients Reviews