Pit Lifting Parking System

Work theoryThree spaces of top, middle and bottom will lift together. Usually, two spaces of middle and bottom are put in the pit. The top space is at the same level as the ground. It may be parked directly. When it is lifted up, the middle and bottom spaces may be parked with cars.Characteristics of equipment1.Save land area and take full use of the underground space.2.Achieve multiple parallel layout, increase the number of parking.3.The middle and bottom spaces have functions of dustproof, rainproof and anti-theft.4.Simple and reliable, easy to operate.Basic parameters1.Maximum car holding size: 5000x2100x1600mm2.Maximum car holding weight: 2000kg3.Size of foundatioanl pit: depth:4260mm, length: 5600mm.4.Holding number of each group: three cars in top, middle and bottom spaces.5.Hydraulic system; motor power: 5.5kw; nominal pressure: 31.5MPa; work pressure: 25MPa.6.Safety protection device: anti-dropping ladder, anti-flowing hydrolic pressure valve.7.Warning device: yes8.Fault instructions: yes9.Frame composition:columns and beams are all made of H-tye steel, groove steel and angle steel.10.Mode of parking and releasing: integral and mixed style11.Power: AC380V 50Hz, 3 phases 5 wires system12.Distribution power: 6.5kw13.Electricity consumption at time of parking: middle layer: 0.05kwh; ground layer: 0.1kwh.14.Operating mode: digital button/non touch recognizing card/manual operation15.Noises: <50db16.Controller: PLC/SCC17.Operating time: top layer: uprising 67s, falling 35s; bottom layer: uprising 34s, falling 18s; maximum parking and releasing time: top layer with directly parking and releasing, middle layer 34s, bottom layer 67s.