EV Charging Infrastructure
Shenzhen Thermal-Phononic Intelligent Technology Co., Ltd.
24 Dec 2025
(
)
Get Your Quote Now : Place of origin : China
Thermal Conductive Potting Gel is a one-to-one ratio, two-component electronic sealing fluid with a thermal conductivity of 1.0W/M.K. It does not corrode the electronic components, adhesive to steel, aluminum, copper, tin, rubber, plastic, wood and more. After solidification, it will not run out from the point of construction regardless the cool or hot temperature. This potting material allows the electronic components and circuits to be free from the vibrative damages.Features: thermal conductivity: fliud adhesive gel 0.8 ~ 3.6W/m·K, electronic insulative thermal conductive sealant.Applications: electric vehicle (EV) batteries, 5G, autopilot system, mobile phone, AIOT, HPC (high performance computing), server, IC, CPU, MOS, LED, mother board, power supply, microinverter, LCD-TV, notebook, PC, telecom device, battery energy storage system, wireless Hub, DDR ll Module, mechatronic drive systems.
SPECIFICATION
| Characterisc | Before curing | After curing |
| Appearance | Viscosity | Operational time | Initial curing conditions | Thermal conductivity | specific gravity | Hardness | Electrical breakdown strength |
| Unit | / | cp·s | min | / | W/m·k | g/cm3 | shore | KV/mm |
| Standards | Visual | ASTM D2196 | Finger touch method | / | ASTM D5470 | ASTM D792 | ASTM D2240 | ASTM D149 |
| RS4111 | Component A: White fluidComponent B: Black fluid | Component A:6k-7kComponent B :6k5-7k5Mixed viscosityt:6k-7k | 120@25° | 3Hrs@25°C30min@100°C | 0.75 | 1.7 | 61 | >20 |
| RS411 | Component A: White fluidComponent B: Grey fluid | A:300000-400000B:200000-300000Mix:250000-350000 | 105@25° | 4Hrs@25°C30min@100°C | 1.10 | 2.2 | 20 | ≥10 |
| RS421 | Component A: White fluidComponent B: Grey fluid | Component A: 8k-1w Component B: 8k5-1wMixed viscosity:8k-1w | 120@25°C | 3Hrs@25°C30min@100C | 2.50 | 2.9 | 55 shore OO | ≥15 |
| RS4113 | Component A: Black fluidComponent B: Brown fluid | Component A :1w3-1w5Component B : 1k1-1k3Moed viscosity : 7k-8k | 30@25° | 1Hr@25°C | 0.41 | 1.4 | 92 | >20 |
The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
* Product Note
Packing specification
50ml (25ml each part);
400ml (200ml each part);
20kg (10kg each part).
Directions for use
Working time @25oC : 30 - 120 min;
For best results, ensure a 1:1 mix ratio is maintained;
Full cure @25oC : 4 hours;
Full cure @100oC : 5 minutes.
Storage
Store in a cool, dry, well-ventilated place.
Shelf life
Shelf life of the product is 12 months after date of shipment.
Clients Reviews