Solar Power Systems
Cangzhou Quanheng Imp&Exp Trade Co.,Ltd
24 Dec 2025
(
)
Get Your Quote Now : US$ 130000 ~ 170000/ Set
automatic die cutting & creasing machine
| Item | Parameters |
| Model | MYQ-1500 |
| Die cutting type | Pressed flat die cutting(Lower side is movable while upper side is unmovable) |
| Max paper transmitting size | 1510*1120mm |
| Min paper transmitting size | 450*550mm |
| Max die cutting size | 1490*1100mm |
| Min gripper size | 8mm |
| Max die cutting pressure | 380N/cm2 |
| Paper processed | Corrugated board 3-9mm |
| Max die cutting speed | 4500 sheets/h |
| Main motor power | 11 kw |
| Total power | ～28 kw |
| Total weight | ～25 T |
| Overall size | 12000*4300*2500mm |
System introductionLead edge feeder(Under suction feeder)
Equipped with lead edge feeder ,it can prevent the cardboard damage by the black wheels. Independent servo actuator can assure the cardboard send to right position and avoid crash on the paper The big power suction fan and the adjusted wind system work for 3-9mm corrugated box.Feeding table
Adjustable brush wheels and pressing wheels to ensure precise position to enter into front and side lay Advance push and pull lay of registration can assure the die cutting precision Rikko light front lay detection system prevent the slanting paper move in main body The lifting of the brush wheel frame is controlled by cylinder. Main body l Adopt automatic centralized lubricating system and setting main chain lubricating system by HMI
Patented design shock absorption system can prolong the life of main body and increase the pressure The intermittent gearbox made in Taiwan can assure the accurate registration and decrease the gripper attackStripping section
Double action movement structure with upper and lower stripping frame facilitates die change
Male/female diecutter model are available for different carton Match with the centerline registration system in diecutting area, there is a same system in the stripping section.Accurate positions can increase production efficiency Gripper front edge waste removal system for higher production efficiencyDiecutting part and Delivery system
Diecutting chase fixed accurately by pneumatic lock system Diecutting plate is putted in and out by air floating device Electric clutch system of main chain can assure the chain steady when it is stopped at high speed Main chain and assist chain is lubricated periodically controlled by PLC Protection window of diecutting can hold the main body clean Lightweight and durable aluminum alloy 7-piece gripper bars with chain of Renold UK or Iwis ensure accurate
Clients Reviews