Flange Electric Heating Tube

It adopts U-shaped tubular electric heating elements, which are assembled on the flange cover according to the design specifications of different heating media and power configuration requirements. It is inserted into the material to be heated, and the large amount of heat emitted by the heating element during operation is transmitted to the heated medium, causing the temperature of the medium to rise and meet the required process requirements. When the medium temperature reaches the set value required by the process, the control system will adjust the output power of the electric heater based on the temperature sensor signal and PID calculation to achieve temperature control of the resistive load of the heating element. Make the medium temperature uniform and meet the required requirements; When the heating element exceeds the temperature or low liquid level, the interlocking protection device of the heating element immediately cuts off the heating power to prevent the heating element from burning out and prolong its service life.