GJT-1 Metal Detector

Product introduction:GJT-1F Series Metal Detect is developed for metal detection in magnetic materials belt conveying system (such as in ferric and non-ferric mines, ironworks, sintering plants, etc.) It is able to suppress “material effect” generated by magnetic ores that have the grade below 70%. When any harmful metal contained by the material passes through the sensor, the metal detector will give an alarm and control signal simultaneously. The sensor is a flat construction that is removable on end and can be mounted easily without cutting the rubber belt. This device also applies to detect metals in non-magnetic materials conveying system.  Technical index and parameters： Ambient Temperature:-20℃-40℃(Main Engine)Supply Voltage: ～220V±10% 50HzOverall Power Consumption: ≤30WBelt Speed: 0.8-3.5m/sControlled Output: relay contact output, with one pair normally open and one pair normally closeContact Rating: 5A,220VAC/28VDCMaximum distance between sensor and control box: ＜15mNOTE: Size of sensor foundation conforms to standards for TD-75 rubber belt conveyor.