SAILONG Desktop PREP System(SLPA-D)

SAILONG Desktop PREPSystem(SLPA-D)

Target groups:

Scientific research,experiment, development and production of high-quality spherical metal powderin universities and research institutes (especially suitable for thedevelopment of new materials)

Main advantages:

1. The working speedis greatly increased, and higher yield of fine powder;

2. Powder sphericityreaches above 95%;

3. The working environment isunder Ar or He inert atmosphere, especially suitable for the development of Ti,Ni, Co, stainless steel, refractory metal and other alloy powders;

4. The whole processof powdering is non-contact which can ensure high powder purity and lowerimpurity content;

5. Occupied area is 4m×3mwith simple installation conditions;

6. Simple andprofessional interface design;

7.Process technology and personnel training system are perfect;

Basic principle:

Consumable electrode made of metal or alloy, whose end surface is heated byplasma arc to melt into liquid, and the liquid is ejected and crushed into finedroplets by the centrifugal force of high-speed rotation of the electrode. Thedroplets eventually form a spherical powder under the action of surface tensionin the condensation process.

TechnicsCharacteristics:

Narrow particle size range; The powder particle surface is smooth and clean; less hollowpowder and satellite powder, less gas inclusion, high powder quality, very suitablefor spraying, hot isostatic pressing(HIP) and 3D printing etc.

Application:

To producenickel base superalloy powder, titanium alloy powder, stainlesssteel powder and refractory metal powder.

Model:

SLPA-D DesktopPlasma Rotating Electrode Atomizing Powder(PREP) system for scientificresearch.

Equipment Characteristics:

The working speed is greatly increased, the powdersphericity has reached more than 95%, and the yield of fine powder has beensignificantly increased. The working environment of powder milling is under Aror He inert atmospheres. The oxygen increment of active metals such as titaniumalloy is controlled within 100ppm, while the oxygen increment of metals such ashigh-temperature alloys can reach 50ppm.Theequipment only  occupies 4m×3m, greatly reducing the requirements forinstallation conditions. The simple and professional operation interface designenables users to operate more conveniently. Users can develop new alloy powderaccording to their own needs, which is especially suitable for universities,scientific research institutions and other units for the trial production ofnew material system powder and the development and production of small-batch,multi-variety high-quality spherical metal/alloy powder.

Technical Parameters: