Tjs 65t High Speed Power Press for Punching and Stamping Machine

Three, six or eight round pillar are adopted to minimize the friction force and heat during long-time running period so as to improve precision and prolong lifetime of machine and die.Multifunctional touch screen in Chinese and English,it is easy to operate by common worker,the angle ,rotating speed and fault of power press can be displayed on screen so that operator can operate safely.Casting iron is made of high tensile strength alloy steel which is inspected by Chinese quality inspection department. The machine body can keep stably and low shock during high speed running process to ensure the precision.It is easy to adjust die-height by manual/electric mode.Reverse-side load dynamic balancing option which can balance shock of bolster and crank during high speed running process to improve precision.For stable precision and good function, all bearings are imported from Japan.TJSH-30T high speed press characteristic:Six round pillar high speed precious press machineLubricating system:Oil cooler or constant temperature lubricating oil(heat and cool device) machine(option)Electric die adjustment device to adjust die height (option)Advanced dynamic balance to minimized noise so as to ensure best precision and smoothnessSeparate control box with touch screen, easy operation, complete function and auxiliary operation key on the side of machine body.High hardness steel is widely adopted on crank, connecting rod, sleeve and newel which can afford high alloy steel sleeve and tile of shaft with high load(8Mpa) and high speed(8m/s) to reduce the load of sleeve and tile of shaft. thus,it can keep good punching precision and prolong life span.High intensity and grinding resistance alloy nodular cast iron is adopted on important cast components such as machine body, foundation, sliding block, flywheel and connecting rod etc  to ensure whole machine stably and high precision.For high precision and speed, all bearings are adopted imported ones from Japan.